Snow Joe BDL-A0100 OPERATOR’S MANUAL

Loading ...

7. Replace the worn belt with a new belt, then screw the

motor support back into position (Fig. 24).

8. Reattach the upper housing to the lower housing by

replacing all housing screws (Fig. 19).

9. Place the left side cover back into position and refasten

the ve (5) screws.

10. Place the right side cover back into position and refasten

the ve (5) screws.

Replacing the Scraper Blade

mWARNING! Disconnect the power from the electric

snow shovel before performing this task.

1. Turn the snow shovel over. Using a drill, remove the

four (4) screws that secure the scraper blade to the base

of the unit (Fig. 25).

2. Remove the old scraper blade (Fig. 26).

3. Install the new scraper blade and fasten it securely to the

housing with the four (4) screws (Fig. 27).

Lubricating the Electric Snow Shovel

This electric snow shovel does not need lubrication. All

bearings are lubricated at the factory for the life of the product.

Fig. 23

Belt

Motor

support

Fig. 24

Belt

Motor support

Fig. 25

4 screws

Drill

Fig. 26

Scraper blade

Fig. 27

Scraper blade

4 screws

Loading ...

Snow Joe BDL-A0100 Electric Shovel Protection & Accessory Bundle Snow Shovel + Cover + Snow Broom