Snow Joe BDL-A0100 OPERATOR’S MANUAL

Loading ...

8. Install the replacement auger by following the above steps

in reverse order (Fig. 18).

Replacing the Belt

mWARNING! Disconnect the power from the electric

snow shovel before performing this task.

1. Disassemble the right side cover by removing the ve (5)

screws that hold it in place (Fig. 11).

2. Disassemble the left side cover by removing the ve (5)

screws that hold it in place (Fig. 13).

3. Remove all housing screws and set the upper housing

apart from the lower housing (Fig. 19).

4. Remove the four (4) screws and two (2) nuts from the

motor support (Fig. 20).

5. Remove the motor support from the body (Fig. 21).

6. Remove the old belt from the body by slowly turning the

auger while lifting the belt (Figs. 22 & 23).

Fig. 18

Auger

Fig. 19

Upper housing

Lower housing

Fig. 20

Motor support

with 4 screws

2 nuts

Fig. 21

Motor support

Fig. 22

Belt

Auger

Loading ...

Snow Joe BDL-A0100 Electric Shovel Protection & Accessory Bundle Snow Shovel + Cover + Snow Broom