Loading ...
Loading ...
Loading ...
11
OPERATING INSTRUCTIONS
Attaching Abrasive Discs
WARNING
Always disconnect the plug
from the power source
before attaching or removing abrasive discs.
Place the sander upside down on a at sur-
face. Remove any dust or debris from the
backing pad. Align the holes of the abrasive
disc with the holes in the backing pad and rm-
ly press the abrasive disc against the backing
pad to ensure a good attachment (Fig. 2).
Turning the Sander On/Off
To turn on the sander, depress the side of the
On/Off switch marked “I”. To turn it off, depress
the side of the On/Off switch marked “O”
(Fig. 3).
Variable-Speed Dial
The variable-speed feature on this sander
allows you to match the proper speed to the
material being sanded.
The variable-speed dial is used to adjust the
speed of the tool. Turn the dial to increase or
decrease the speed of the tool. Position “1”
selects the slowest speed; position “6” selects
the fastest speed. Adjust the speed for opti-
mum performance (Fig. 4).
Fig. 2
Fig. 3
Fig. 4
Loading ...
Loading ...
Loading ...