Loading ...
Loading ...
Loading ...
The pressure gauge is installed in final stage of the compressor to display discharge pressure.
The safety valve is installed at the place of discharge hole, if the discharge pressure is higher than
preset value, the safety valve will open and release pressure.
Note : release valve will supply protect with more reliable and safety
3.5 Pressure switch（Auto stop version only）
The compressors are preset rated working pressure as per order require. The compressor will stop
automatically when pressure reach rated pressure.
Note : don’t try to adjust it if not get authorized
3.6 ON/OFF
Press ON/OFF button to turn on and turn off compress.
3.7 Drain valve
Open valve in separator and filter to drain moisture and oil from piping when finish tank filling
every time
Note : make sure all drain valve are open when start Compressor
3.8 Cooling system
It is cooled by water, and water container is not included in compressor package.
Best temperature of cool water for working is between
50℃ to 70℃
Max working temperature is 75℃, when is reaches 75℃.
necessary to replace water or stop running the compressor.
The water in container should be no less than 20L/5 gallon, it works better with more water when
cooling down.
4
INSTALLATION AND OPERATION
4.1 Installation
Must use the compressor on the surface which is totally flat and dry. Put water in the container and
place the water pump into the container with no less than 20L/5 gallon fresh water, the water
pump has to be totally immersed in water, to make sure water flows smoothly.
Loading ...
Loading ...
Loading ...