Loading ...
Loading ...
Loading ...
page 6
8. Blade Assembly.
7. Canopy Assembly.
canopy
hanging bracket
slotted
hole
WARNING: To reduce the risk of serious
bodily injury, DO NOT use power tools to
assemble the blades. If overtightened,
blades may crack and break.
Locate 18 blade attachment screws/washers
in a hardware pack. Slide blade through one
of the narrow, rectangular openings on
motor housing, aligning holes in blade with
holes in blade arm located on the
underside of the motor housing. Insert 3
blade attachment screws/washers with
fingers first and then tighten screws
securely with a Phillips screwdriver. [Note:
Use slot located on fitter plate for easy
access to holes in blade arm.] Repeat for
remaining blades.
Note: Tighten blade attachment screws
twice a year.
blade
blade attachment
screws/washers
blade arm
Raise canopy to hanging bracket, aligning
slotted holes in canopy with loosened
screws in hanging bracket. Twist canopy to
lock. Insert screws (along with star washers)
previously removed (on page 3, Section 4)
and secure all screws with a Phillips
screwdriver.
Loading ...
Loading ...
Loading ...