TONE-T90Q User Manual

Loading ...

Connecting with Bluetooth for Use

Connecting the Smartphone to Earbuds via Bluetooth

a Turn on the Bluetooth® function of your smartphone or a device you want to connect.

b Open the cover with earbuds attached to the charging case. The blue battery status indicator on the front

blinks. If the blue battery status indicator does not blink, or if you want to connect a device other than the one

already connected, touch and hold the touch pad of the left or right earbud for 3 - 5 seconds.

~39 inch, ~1m

c When the Fast Pair connection pop-up appears at the bottom of the smartphone screen, touch the pop-up

to connect.

• Only Android™ 6.0 or higher is supported, and Bluetooth® and location information settings of the mobile

devicearerequired.

d If the connection pop-up does not show up, select and connect [TONE-T90Q] in the Bluetooth® menu of the

smartphone. (For users of iOS or Android 5.0 or lower)

• TONE-T90Q_LE is not a valid connection model name in the Bluetooth® connection device list. Check the

model name you are using and connect with the model name that does not contain “LE”.

• If the earbuds model name is displayed abnormally on the Android device, please change the model name

in the Bluetooth® menu of the settings of the connected device.

Note

• To connect with another device, perform the above procedures again.

Connecting with Bluetooth for Use

Loading ...

User Manual - Page 9