Loading ...
Loading ...
Loading ...
CARE/STORAGE ▸ SENSOR
160
SENSOR
SENSOR CLEANING
Alternatively, send your camera to the Leica Customer Care depart-
ment for sensor cleaning (see p. 184). This service is not part of the
warranty offering and will therefore incur charges.
Note
• Leica Camera AG will not accept any responsibility for damage
caused by the user when cleaning the sensor.
▸ Select Camera Settings in the main menu
▸ Select
Sensor Cleaning
• The prompt Do you want to start the sensor cleaning? appears.
▸ Select
Yes / No
• The battery capacity must be at least 60% for the shutter to
open.
• A warning message
Battery low for sensor cleaning will appear
if the battery capacity is lower to indicate that the function is
currently not available and
Yes cannot be selected.
▸ Clean the sensor
• Make sure you follow the instructions below.
▸ Switch off the camera after you finish cleaning
• The following message appears:
Please stop sensor cleaning immediately. Shutdown in %d s. .
• The shutter will remain open for another 10 s.
Loading ...
Loading ...
Loading ...