Loading ...
Loading ...
Loading ...
Installation
27
EN
9. Remove the seals from the plugs and
thermocouples of each burner.
10. Lift the hob top and remove it.
Replacing nozzles
1. Undo the burner work surface fastening
screw.
2. Remove the burner work surface and the
corresponding gas supply hose.
3. Lift the trigger of the microswitch for the
gas tap (1) then remove it (2).
4. Use a 7-mm spanner to remove the
nozzle and replace it with the new one
for the required gas supply, following the
indications given in the relevant tables
(see Burner and nozzle specifications
tables”).
The nozzle tightening torque must
be no more than 3 Nm.
Loading ...
Loading ...
Loading ...