Loading ...
Loading ...
Loading ...
49
Automotive Diagnostic Platform GT75 User's Manual V1.01
Some tests display a command to the operator. For example, if “Pressing
Brake Pedal” displays, the operator has to press and hold the brake pedal
and then continue. Actual tests vary by vehicle manufacturer, year, make.
Typical special test options include:
● Deactivate/Activate SBC/EPB systems - allows to deactivate brakes for
further service or maintenance work on brake systems or activate brakes
when service or maintenance work on brake systems are completed.
●
Adaptation on Audi A8 - allows to set new pad thickness of rear brakes
calipers after changing brake discs & pads on Audi A8 models.
●
Replace hydraulic brake systems fluid/bleed brake system on
Mercedes SBC vehicles - allows to change brake fluid/bleed brake
system.
● Perform service reset and service position on BMW EPB vehicles -
allows to do the CBS reset and CBS correction for front brake and rear
brake.
●
Perform activation/service work on Volvo PBM vehicles – allows to
perform installation check, applying parking brake, releasing parking
brake, activating service mode and exiting service mode.
● Reset memory on Toyota EPB vehicles – allows to clear the learned
memory of the EPB ECU.
●
Perform brake cable replacement and electric parking brake
replacement – allows to fit in or remove the brake cable safely, adjust
brake cable’s tension and calibrate the electric parking brake
replacement.
● Save and write clutch pedal programming on Renault EPB vehicles –
allows to save clutch pedal programming on Renault vehicles fitted with
manual gearbox. After this command is activated, the tool allows to "flash"
the electric parking brake unit with the saved clutch data.
● Perform control function and reset function on Opel EPB vehicles -
allows to apply/release park brake cable service, provides park brake
cable service replacement procedures and calibrate the parking brake
systems after brake service.
●
Sensor calibration on Honda EPB vehicles - allows to program the
current output value of each sensor into the electric parking brake unit.
● Provides parking brake unjam procedure and perform longitudinal
accelerometer calibration on Land Rover EPB vehicles - allows to
drive the electronic park brake so it is unjamed in the releasing direction
and then drive it into mounting position or the latching position; also
allows to perform longitudinal accelerometer calibration.
● EPB systems must be deactivated before carrying out any maintenance/
service work on the brakes such as changing of pads, discs and calipers.
●
Use proper tools to avoid the risk of body injuries of mechanics and
technicians and damage to the brake system.
Loading ...
Loading ...
Loading ...