Loading ...
Loading ...
Loading ...
To cable your router:
1.
Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3.
Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5.
If the Router LED does not light, make sure that the power adapter is properly
connected to your router and power outlet.
Place your Orbi satellite
Your Orbi satellite must be within range of your Orbi router’s WiFi signal in order for it
to sync with your router. Use your satellite's LED to help you determine where to place
your satellite.
If you own more than one Orbi satellite, your Orbi satellites can sync with each other or
with your Orbi router. Place your Orbi satellites so that they are within range of each
other or the Orbi router. However, at least one Orbi satellite must be within range of
your Orbi router.
Sync your Orbi satellite with your Orbi router
The Orbi satellite that comes with your Orbi router is preset to automatically find and
sync to your Orbi router's WiFi signal.
To sync your satellite:
1. Place your satellite.
For more information, see Place your Orbi satellite on page 12.
2. Connect the satellite to a power source.
The satellite LED pulses white. The satellite automatically finds the Orbi router’s WiFi
signal and attempts to sync to the Orbi router.
User Manual12Overview
Orbi Whole Home AC1200 Mesh WiFi System
Loading ...
Loading ...
Loading ...