7288552 REPL PWA SEARS 350

Installation Guide & Owners Manual Electronic Control Board PWA Replacement Kenmore 383560

For 7288552.

PDF File Manual, 1 pages, Read Online | Download pdf file

7288552 photo
TIMER (PWA) REPLACEMENT
IMPORTANT: BE SURE THE VALVE CAM INDICATES ``SERVICE''
POSITION WHEN REPLACING THE TIMER (PWA), TO ASSURE
BOTH VALVE AND TIMER ARE ORIENTED, OR TIMED, TO THE
SAME CYCLE. If the valve is not in service position, see step 4
below.
CAUTION: When installing the timer (PWA) on the faceplate, use
care not to twist the circuit board, or force it onto the mounting pegs.
Twisting could damage the printed circuits, or break the LED glass.
After installing the timer (PWA) and plugging in the transformer, set
the S number as follows.
7288340 (Rev. B 5/15/06)
MODEL NOS. 625.383560 and 625.393560
When the transformer is plugged in, a test number (example: J1.1) shows in the display for a few
seconds, followed by a flashing - - - -. Set the correct code number for your softener as follows.
NOTE: If - - - - is not flashing, press and hold the SELECT button until this display shows.
1. Press the UP [] or DOWN [] button until the correct model code shows, as needed for your model
softener.
MODEL 625.383560 MODEL 625.393560
2. Press SELECT to display the flashing SET TIME display.
3. Program the timer following instructions in your owners manual, and on the underside of the salt tank cover.
4. If the valve is not in SERVICE position (see IMPORTANT, above), press the ON/OFF - HOLD/RECHARGE
button and hold for 3 seconds to start a recharge. The softener cycles through the recharge positions for the
next 2 hours. After the 2 hours, the timer and valve are properly oriented together.
NOTE TO SERVICE TECHNICIAN: To save time, use the manual advance procedures to properly time and
check operation...see Servicer's Tech Information in the owners manual.
PM
PRESENT TIME
AM
PRESENT TIME
If the present time is be-
tween noon and midnight,
be sure PM shows.
If the present time is be-
tween midnight and noon,
be sure AM shows.
Position markers
(valve in service)
CAM
MOTOR

Other documents for EcoPure 7288552

The following documents are available:
User Manual
  • Installation Guide & Owners Manual Electronic Control Board PWA Replacement Kenmore 383560 - (English) Read Online | Download pdf
Photos

Specifications