Tripp Lite B127-002-H Owner’s Manual

Loading ...

Splitter Daisy-Chain Installation

(B127-004-H and B127-008H only)

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the HDMI source to the INPUT

port on the B127-004-H or B127-008H unit.

3. Using a 6 ft./1.83 m HDMI 2.0 cable (such as Tripp Lite

P569-006-CERT or P568-006-2A cables), connect the LOCAL port

on the B127-004-H or B127-008H to the INPUT port on a second

B127-004-H or B127-008H unit.

4. Repeat step 3 if connecting a third B127-004-H or B127-008H unit.

Note: Only three levels of splitters can be cascaded.

5. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a local

monitor to the LOCAL HDMI port of the last B127-004-H unit in the

installation.

Note: Monitors with varying resolutions like 1080p or 4K 30 Hz can be

connected to the local HDMI port without affecting the 4K @ 60 Hz signal.

6. Using Cat6 cable, connect one of the RJ45 output ports on the local

transmitter units to the RJ45 input port on a B127-100-H,

B127-200-H or B127-100-H-SR remote receiver unit.

7. Repeat step 6 for each additional remote unit being connected.

8. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the B127-100-H, B127-200-H

or B127-100-H-SR to a display.

9. Repeat step 8 for each additional monitor you are connecting to a

remote receiver unit.

10. Turn on the power to all your connected displays.

20-02-371-933918_Rev C.indd 1720-02-371-933918_Rev C.indd 17 3/6/2020 1:46:30 PM3/6/2020 1:46:30 PM

Loading ...

Tripp Lite B127-002-H 2-Port HDMI over Cat6 Splitter/Extender, Transmitter