Tripp Lite B127-002-H Owner’s Manual

Loading ...

Standard Extender/Splitter Installation

Splitter Daisy-Chain Installation

(B127-004-H and B127-008H only)

port will illuminate to indicate the unit is receiving power from the

extender/splitter.

9. Turn on the power to the HDMI source. The (orange) RJ45 LEDs will

illuminate on the B127-002-H , B127-004-H and B127-008H to

indicate the unit is receiving a signal from the source. Additionally, the

OUTPUT (orange) LED will illuminate for each port signal connection.

10. The RJ45 (orange) LEDs on the B127-100-H / B127-200-H and

orange LED on the B127-100-H-SR will illuminate to indicate a signal

is being received from the extender/splitter. The screen should now

display on the connected monitors.

Notes:

1) Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher

than 24 AWG, will result in shorter extension distance. Higher gauge cabling,

such as 26 AWG, has a more limited transmission capability than lower gauge

cabling. All Tripp Lite N202-Series cables are made with 24 AWG solid-wire

cabling.

3) Using the B127-100-H or the B127-200-H, a 4K/60 Hz signal can be extended

up to 125 ft. (38 m) from the source. Using a B127-100-H-SR, a 4K/60 Hz

signal can be extended up to 50 ft. (15 m) from the source.

4) The B127-200-H supports two HDMI output ports.

20-02-371-933918_Rev C.indd 1520-02-371-933918_Rev C.indd 15 3/6/2020 1:46:30 PM3/6/2020 1:46:30 PM

Loading ...

Tripp Lite B127-002-H 2-Port HDMI over Cat6 Splitter/Extender, Transmitter