Tripp Lite B127-002-H 2-Port HDMI over Cat6 Splitter/Extender, Transmitter for Video/Audio, 4K 60 Hz, PoC, HDR, 125 ft., TAA

Owner’s Manual - Page 12

For B127-002-H. Also, The document are for others Tripp Lite models: B127-1A1-HH, B127-002-2H2, B127-004-H4H, B127-2A1-HH, B127-004-H, B127-008-H, B127-100-H, B127-100-H-SR, B127-200-H

PDF File Manual, 20 pages, Read Online | Download pdf file

B127-002-H photo
Loading ...
Loading ...
Loading ...
12
3. Optional for B127-2A1-HH: Using an HDMI 2.0 cable (such as
Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect
a local monitor to the LOCALOUT port on the B127-2A1-HH local
transmitter unit.
Note: Monitors with varying resolutions like 1080p or 4K 30 Hz can be
connected to the local HDMI port without affecting the 4K @ 60 Hz signal.
4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit
to the RJ45 port on the remote receiver unit.
5.
Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect one of the remote receiver unit’s
HDMI ports to a monitor/TV and the other to a second monitor/TV.
6. Turn the power on to the connected TVs/monitors. The LOCAL
(orange) LED will illuminate to indicate the local port has been
connected to a display.
7. Connect the external power supply to the local transmitter unit and
plug it into an available wall outlet or a Tripp Lite Surge Protector,
Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).
The POWER (green) LED on the local transmitter unit will illuminate
to indicate the unit is receiving power from the external power supply.
The POWER (green) LED on the remote receiver unit will illuminate
to indicate the unit is receiving power from the local transmitter unit
through PoC technology.
8. Turn on the power to the HDMI source. The OUTPUT (orange) LED
on the local transmitter unit illuminates to indicate a signal is being
received from the source.
9. The (orange) RJ45 LED will illuminate on both local transmitter and
remote receiver units to indicate a signal is being received from
source to display. The screen should now display on the connected
monitor(s).
Standard Extender/Splitter Installation
20-02-371-933918_Rev C.indd 1220-02-371-933918_Rev C.indd 12 3/6/2020 1:46:30 PM3/6/2020 1:46:30 PM
Loading ...
Loading ...
Loading ...