Loading ...
Loading ...
Loading ...
- 32 -
Measuring Temperature
1. Set the rotary switch to the TEMP position. The
secondary display shows the environment temperature.
2. Connect the negative " - " plug of the K Type
thermocouple to the " COM " terminal, and the positive " + " plug of the
K Type thermocouple to the " INPUT " terminal.
3. Connect the sensing end of the thermocouple to the object to be
tested.
4. Wait a while until thermal equilibrium between the thermocouple probe
and the object is reached, then read the
readings on the screen. The
primary display shows the celsius measured temperature of the
object under test, and the secondary display shows the
fahrenheit measured temperature of the object under test.
Non-Contact AC Voltage Detection
1. Set the rotary switch to the NCV position. The symbol " NCV " appears
on the upper area of the screen. The primary display shows "
", the
secondary display shows the environment temperature. ( See Figure 3. )
Note
To avoid possible damage to the meter or other equipment, remember that
while the meter is rated for -20oC to +1000oC and -4oF to 1832oF, the K
Type Thermocouple provided with the meter is rated to 250oC. For
temperature out of that range, use a higher rated thermocouple.
The K Type Thermocouple provided with the meter is a present, it is not
professional and can only be used for non-critical measu
rements. For
accurate measurements, use a professional thermocouple.
Loading ...
Loading ...
Loading ...