Loading ...
Loading ...
Loading ...
4
Locate Controller
1. Locate closest exterior electrical outlet near
desired installation area. (Fig. 1)
2. Controller must be installed a minimum of
12 inches above ground level and within 18
inches of an electrical outlet. (Fig. 1)
3. Consult a local electrician if an exterior
electrical outlet needs to be installed.
NOTE: Controller requires an input voltage
of 120 VAC, 60Hz.
Mount Controller
1. Remove metal plate from back of
controller and hold against wall.
2. Ensure the plate is level before
screwing to wall. Plate must be
installed a minimum of 12 inches
above ground level.
3. Screw plate to wall through four
holes using M4 x 14mm wood screws
provided. (Fig. 2)
4. Once mounting plate is secure, align
tabs on mounting plate with two
recessed slots on back of controller
and drop into place.
5. Attach controller to bottom lip of mounting
plate using M4 x 10mm self tapping screws
provided.
(Fig. 3)
NOTE: Mounting surfaces can vary, if installing
on brick use fasteners suitable for application.
GROUND
MIN.
12 inches
GROUND
MIN.
12 inches
MAX.
18 inches
Fig. 1
Fig. 2
Fig. 3
Loading ...
Loading ...
Loading ...