Loading ...
Loading ...
Loading ...
v
w
i
w,_ La]
v A
w . .
_ v
.-- L
iiiiiH/l! iiii!l il
i
0
E
0
Before you call for service...
Troubleshooting Tips
Possible Causes What To Do
Display goes blank A fuse in your home may be Replacethe fuse or reset the circuit breaker.
(onsomemodels) blown or the circuit breaker
tripped.
The clock is turned off so that it Seethe Usingthe clock and timer section.
does not show in the display.
Display flashes Power failure. Resetthe clock.
(onsomemodels)
Unable to get the Oven control pads were The Bake and Broil Hi/Lo pads must be touched at
display to show '_F" not touched properly, the same time and held for 3 seconds.
(onsomemodels)
Power outage, Power outage or surge. Resetthe clock. Ifthe oven was in use,you must reset
clock flashes it by touching the Clear/Offpad, setting the clock and
(onsomemodels) resetting any cooking function.
"Burning" or "oily" odor This is normal in a new oven To speed the process,set a self-clean cycle for a
emitting from the vent and will disappear in time. minimum of 3 hours. Seethe Using the self-cleaning
oven section.
Strong odor An odor from the insulation Thisis temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise A cooling fan may automatically Thisis normal. The cooling fan will turn off and on.
turn on and off to cool
internal parts.
Drawer does notslide The drawer is out of alignment. Fullyextend the drawer and push it all the way in.
smoothly or drags Seethe Careand cleaning of the range section.
Drawer is overloaded or load Reduceweight. Redistribute drawer contents.
is unbalanced.
48
Loading ...
Loading ...
Loading ...