Loading ...
Loading ...
Loading ...
Aboutthe temperaturecontrols, gecom
CONTROL _'_
HOLD 3 SECS
The temperature controls are preset in the factory at 37°1:for the
refrigerator compartment and #°1:for the freezer compartment. Allow
24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature
as well as the actual temperature in the refrigerator and freezer.
The actual temperature may vary slightly from the SET temperature
based on usage and operating environment.
Setting either or both controls to OFFstops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Tochange the temperature, press and release tile
WARMER or COLDERpad. Tile SETlight will come
on and tile display will show tile set teml)erature.
To change tile temperatm'e, tap either tile
WARMERor COLDERpad tlntil tile desired
temperature is displayed. Refl_igerator temperatm'es
can be a(!justed between 34°F and 44°F and tile
fl'eezer teini)eratures can be a(!justed between
-()°F and +6°E
Once tile desired temperature has 1)een set,
the temperatm'e display will return to the actual
refl_igerator and fl'eezer temperatm'es alter 5
seconds. Several adjusnnents may be required.
Each time you a(!just controls, allow 24 hom_ tot tile
refl_igerator to reach tile temperature you have set.
Toturn the cooling system off, tap tile WARMER pad
fin" either tile reliJgerator or tile fl'eezer tmtil tile
display shows OFF.Toturnthe unit back on,press tile
COLDERpad tin" either tile refrigerator or fl'eezer
Tile SETlight will illuminate on tile side you
selected. Then press tile COLDERpad again (on tile
side where tile SETlight is illuminated) and it will
go to tile preset points ot O°Ftor tile fl'eezer and
37°Ftor tile refl_igerato_: Setting either or both
controls to OF.F.stops cooling in both tile fl'eezer
and reti_igerator compartments, but does not shut
off electrical power to tile refl_igerator
Locking the Controls (onsomemodels)
This feature allo_vs you to lock tile controls
so the settings cmmot be changed.
Tolock the controls:
O Set tile controls to tile desired settings.
O Press and hold tile lock pad for
3 seconds.
When tile controls are locked, tile indicator
light will come on and tile control settings
will not be displayed.
Tounlock the controls:
Press and hold tile lock pad lbr 3 seconds.
_Mter tmlocking tile controls, tile settings
will be displayed, tile lock indicator light
will go ()tit and tile settings can be changed.
Loading ...
Loading ...
Loading ...