Makita GPK01Z User Manual

Loading ...

17 ENGLISH

3. Draw a cutting line on the workpiece and align the

blade edge with the cutting line.

Fig.37

►1. Blade edge 2. Cutting line 3. Depth guide

4. Thumb screw

NOTE: Make sure that the blade edge comes out of

thesideendofthedrumby1.6mm–1.8mm(1/16″)

forshiplapping.(See“A”inthefollowinggure.)

* You can opt to let the blade edge come out of

thesideendofthefrontbaseby0.2mm–0.4mm

(1/64″).(See“B”inthefollowinggure.)

Fig.38

►

1. Blade edge 2. Side end of drum 3. Side end of front base

4. Slide the edge fence in the guide rule inwards until

it comes in contact with the side wall of the workpiece.

Then secure it in place with the thumb screw.

Fig.39

►

1. Guide rule 2. Edge fence 3. Side wall 4. Thumb screw

5. Performplanningoperationbymovingthetool

with the whole edge fence sliding along the side wall of

the workpiece.

NOTE: Reaching lengths of the guide fence can be

extendedbyattachinganextrapieceofwoodtothe

attachment holes in the guide fence.

Fig.40

►1. Extra piece of wood 2. Attachment holes

Chamfering

Fig.41

Use the "V" grooves cut in the front base to make a

chamferingcutasshowninthegure.

Performplanningoperationbymovingthetoolaligning

one of the three "V" grooves in the front base with the

corner edge of the workpiece.

Fig.42

►1. V groove for medium chamfers 2. V groove for

small chamfers 3. V groove for large chamfers

Loading ...

Makita GPK01Z 40V max XGT Brushless Cordless 3‑1/4" Planer, AWS Capable, Tool Only