Loading ...
Loading ...
Loading ...
The Long Fader operates on the LF signal path and
is mainly used for creating the monitor mix and the
nal stereo mix.
The fader is expected to operate around the 0dB
mark with 10dB of gain in hand, allowing the signal
to be increased or decreased in level.
When setting levels, start with the fader at the 0dB
position, then adjust the input sensitivity control
to the correct level.
CH FLIP
Flips the channel path onto the Long Fader and the
playback path onto the Short Fader.
PAN
Places the signal in the stereo eld by balancing the
signal between the left and right channels.
MIX
Pressing this button sends this channel to the mix
bus. To minimise the noise oor of the console, this
should be disengaged if the channel is not in use.
SOLO
Mutes every channel except channels that are
soloed.
CUT
Cuts the sound output of the particular channel.
FADER
Controls the amount of signal being sent out of the
Long Fader path.
1
2
3
4
5
6
1
2
4
3
6
5
14
LONG Faders
Loading ...
Loading ...
Loading ...