Loading ...
Loading ...
Loading ...
COPY LF
Selects the post fader LF signal as the input to
the Short Fader path, overriding the Mic or Tape
selection from the Flip Switch. This can be used to
ride the level of the Aux Sends on the Short Fader
(great for delay and reverb throws).
PAN
Places the signal in the stereo eld by balancing the
signal between the left and right channels.
MIX
Sends this channel to the Mix Bus. To minimise the
noise oor of the console, this should be disengaged
if the channel is not in use.
FADER
Controls the amount of signal being sent out of the
Short Fader path.
SOLO
Mutes every channel except channels that are
soloed.
CUT
Cuts the Short Fader output of that particular
channel.
ASP8024-HE is an inline console. This means that
there are both input and monitoring signal paths
on the same channel. By default, the Short Fader
contains the input signal, however you can use the
channel ip switch to switch to the tape signal.
Don’t forget that you can assign the Aux/Cue
Sends and EQ to the Short Faders by pressing the
SF buttons.
1
2
3
4
5
6
1
4
3
2
5
6
13
Short Faders
Loading ...
Loading ...
Loading ...