Loading ...
Loading ...
Loading ...
Leveling Freezer Drawer (if necessary)
To level the freezer drawer:
1
2
Check gasket seal around top, bottom, and sides of freezer drawer.
If gasket is not sealed, open drawer and slightly loosen four drawer screws (two on each side) to
allow drawer to rotate.
Remove H,
_,X
Head Drawer _r
Screw Screw
Remove .... Remove
Hex Head Drawer Hex Head Drawer
Screw Screw
3 Close drawer and recheck the seal on the
gasket (A). Open the drawer grabbing by
the sides in the center (B). Be careful not to
rotate the drawer.
Push Grab _
Against Drawer
Freezer at Center
Drawer from Both
Sides
Drawer
Out
4 Tighten four drawer screws.
5 Recheck gasket seal.
Level Refrigerator & Adjust Doors
(if necessary)
Guidelines for final positioning of your
refrigerator:
All four corners of the cabinet must rest firmly
on the floor.
The sides should tilt 1/4inch (6 mm) from front
to back (to ensure that doors close and seal
properly).
Doors should align with each other and be
level.
Most of these conditions can be met by
raising or lowering the adjustable front
rollers.
To level the cabinet using the front rollers:
1 Slightly open freezer drawer. Lift the toe grille
and gently pull forward (see illustration).
2 You can raise or lower each door. Use a
3/8 inch socket wrench to turn the adjustment
screws (one per side).
To raise: turn adjustment screw clockwise.
To lower: turn adjustment screw
counterclockwise.
3 Ensure both doors are bind-free with their
seals touching the cabinet on all four sides
and that cabinet is stable.
Loading ...
Loading ...
Loading ...