Loading ...
Loading ...
Loading ...
Cleaning the ice maker
Clean the ice
maker and ice ..........
bin at regular
intervals, especially
prior to vacation or
moving.
1 Turn off the
ice maker.
Remove
the ice bin
by pulling
straight out.
Removing Ice Bin
When removing or replacing the ice bin, avoid
rotating the auger in the ice bin. If the auger is
accidentally rotated, you must realign the auger
by turning it in 45 degree turns (see below)
until the ice bin fits into place with the drive
mechanism. If the auger is not properly aligned
when replacing the ice bin, the refrigerator will
not dispense ice. The fresh food door also may
not close properly causing warm air to leak into
the fresh food compartment.
Empty and carefully clean the ice bin with
mild detergent. Do not use harsh or abrasive
cleaners. Rinse with clear water.
4 Allow the ice bin to dry completely before
replacing in the freezer.
5 Replace the ice bin. Turn the ice maker on.
Remove and empty the ice bin if =
An extended power failure (one hour or
longer) causes ice cubes in the ice bin to melt
and refreeze together after power is restored,
jamming the dispenser mechanism.
You do not use the ice dispenser frequently.
Ice cubes will freeze together in the bin,
jamming the dispenser mechanism.
Remove the ice bin and shake to loosen the cubes
or clean as explained above.
Auger
Adjusting Ice Bin Auger
NEVER use an ice pick or similar sharp
instrument to break up the ice. This could
damage the ice bin and dispenser mechanism.
To loosen stuck ice, use warm water. Before
replacing the ice bin, make sure it is completely
dry. ................................................................................................................................................................................................................................
Loading ...
Loading ...
Loading ...