Black+Decker HSVB420J INSTRUCTION MANUAL

Loading ...

ENGLISH

4. Reassemble the cleaned filter assembly and insert into

the dust bowl.

5. To replace the dust bowl, push it back onto the hand

vacuum until it clicks firmly into place.



WARNING: Never use the appliance

without the filters. Optimum dust collection will only

be achieved with a clean filter.

Fig. F

Fig. G

Cleaning the dust bowl and filter

The dust bowl

, pre filter

and filter

can be washed

in warm soapy water.

1. Make sure the pre filter

, filter

and the

dust bowl

are completely dry before installing.

Removing and cleaning the rotary brushes (Fig. H)



CAUTION: To reduce the risk of injury from

moving parts, disconnect the floor head from the

vacuum before cleaning orservicing.

• To remove the rotary brush

, pinch and lift the plastic

tab

on the pivoting clip

away from the floor

head

• Lift the rotary brush

out of the floor head. Clear

the brushes of any hair or other debris that may have

accumulated.

• Replace rotary brush, and secure pivoting clip before

using vacuum.

Fig. H

Replacing the filters

The filters should be replaced every 6 to 9 months and

whenever worn or damaged. Replacement filters are

available from your BLACK+DECKERdealer.

Visit www.blackanddecker.com to locatedealers.

• Remove the old filters as describedin Cleaning

theFilters.

• Fit the new filters as describedin Cleaning the Filters.

(cat. no:

SVF12)

MAINTENANCE

Use only mild soap and damp cloth to clean the vac. Never

let any liquid get inside the vac; never immerse any part of

the vacuum into aliquid.



WARNING: Make sure the vacuum is

completely dry before usingit.

IMPORTANT: To assure product SAFETY and RELIABILITY,

repairs, maintenance and adjustment (other than those

listed in this manual) should be performed by authorized

service centers or other qualified service organizations,

always using identical replacementparts.

TROUBLESHOOTING

If the product does not work, check the following:

• The charger was correctly plugged in for recharge. (It

feels slightly warm to the touch.)

• The charger cord is not damaged and is correctly attached.

• The charger is plugged into a working electricaloutlet.

• The switch is in the “OFF” position whencharging.

If vacuum performance is poor, check the following:

• Clean the filters. (See "Cleaning and emptying the

vacuum" section.)

• Empty the dust bowl. (See "Cleaning and emptying the

vacuum" section.)

• Clean the rotary brushes. (See "Removing and cleaning

the rotary brushes" section.)

• The red LED flashes continuously, plug in the charger

and perform a recharge cycle

For assistance with your product, visit our website

www.blackanddecker.com for the location of the service

center nearest you or call the BLACK+DECKER help line at

1–800–544–6986.

ACCESSORIES

Recommended accessories for use with your appliance are

available from your local dealer or authorized service center.

If you need assistance regarding accessories, please call:

18005446986.



WARNING: The use of any accessory

not recommended for use with this appliance could

behazardous.

The RBRC® Seal

The RBRC® (Rechargeable Battery

Recycling Corporation) Seal on the nickel

cadmium, nickel metal hydride or lithium-

Loading ...

Black+Decker HSVB420J Powerseries Cordless Stick Vacuum Cleaner & Hand Vac, 2-in-1

INSTRUCTION MANUAL - Page 7