Loading ...
Loading ...
Loading ...
20
Advice and reccomendations on use
Advice and reccomendations on use
4) BOILING FUNCTION
a) Place the kettle on the power base unit (5) and press the “on/off” button (9). When the kettle starts boi-
ling/heating, the digits (11) grow up showing, on the display (2), the average temperature of the water inside
the kettle.
b) When the kettle is heating the red on/off icon (16) starts to breathe and the DOT water level indicator (12)
change colour from Blue (cold water) to Red (Hot water).
c) When the water temperature reaches 100 °C /212°F the kettle switches off automatically, it emits 3 bips
and the digits (11) show the word “HOT” for 10 seconds; then the digits (11) continue showing the average
water temperature inside the kettle.
d) At any time, the function boiling water, can be stopped by pressing the On/Off button (9).
e) POURING OUT WATER: Remove the kettle from the power base unit (5), holding it by its handle (3). Ensure
that the kettle body remains steady while lifting it from the power base unit (5).
Pour the water from the spout (7) with the lid (1) closed. ATTENTION : boiling water can cause burns. Always
ensure to pour out boiling water slowly and carefully, taking care not to tilt the spout too rapidly.
f) The water temperature shown on the display corresponds to an average temperature of the water inside
the kettle.
5) HEATING / TEMPERATURE SETTING FUNCTION
a) The Kettle can heat the water to the required temperature between 40°C (104°F) and 100°C (212°F),
Tolerance ± 3°C).
b) Place the kettle on the power base unit (5). To set the temperature simply turn clockwise or counter-
clockwise the on/off button (9). The digits (11) numbers increase or decrease accordingly. Stop to turn at
required temperature between 40°C (104°F) and 100°C (212°F).
c) The blinking digits (11) show the temperature selected for 15 seconds.
d) When on/off button (9) is pressed, within these 15 seconds, the kettle starts to heat at the required
temperature. If the on/off button (9) is pressed after these 15 seconds the temperature setting is cancelled
and the kettle starts to boil to the default temperature (100°C / 212°F).
e) When the water temperature reaches the required temperature the kettle switches off automatically, the
kettle emits 3 bips and the digits (11) show the word “HOT” for 10 seconds; the digits show the current
average water temperature inside the kettle.
f) At any time, the heating water function, can be stopped by pressing the On/Off button (9).
g) ATTENTION: The temperature setting function is not a permanent function. This function has to be set each
time the temperature setting needs to be used. The water temperature shown on the display corresponds to
an average temperature of the water inside the kettle (Tolerance ± 3°C)
6) KEEP WARM FUNCTION
The Kettle allows to keep, for one hour, the required water temperature between 40°C (104°F) and 100°C
(212°F), Tolerance around ± 3°C. To activate this function follow the next steps:
1) To activate simply keep pressed on/off button (9) more than 2 seconds and the digits (11) show K W ON,
that means KEEP WARM is activated.
2) If no temperature setting and ON/OFF button is pressed, kettle automatically keeps warm at(100°C/
212°F). If temperature setting is chosen,once xed and on/off button is pressed, kettle keeps warm at the
desired temp.
3) To deactivate this function keep pressed again the on/off button more than 2 seconds and the digits (11)
show K W OFF, that means KEEP WARM is OFF.
4) DURING the time of KEEP WARM activated, the 3 digits show the required temperature for 6 seconds and
the letters K W for 3 seconds. The on/off red icon (16) breathes.
5) After 60 minutes, keep warm function quits automatically.
Loading ...
Loading ...
Loading ...