Loading ...
Loading ...
Loading ...
Troubleshooting en
45
Fault Cause and troubleshooting
The programme does
not start.
Childproof lock is activated.
▶
→"Deactivating the childproof lock", Page34
You have not pressedStart/ Reload .
▶ Press Start/ Reload .
No programme set.
1.
→"Setting a programme", Page30.
2.
→"Starting the programme", Page30.
The length of the pro-
gramme changes dur-
ing the drying cycle.
The programme operation is optimised electronically.
This may change the programme duration.
▶ Not a fault – no action required.
Pumping noise. Condensation pump active.
▶ Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶ Not a fault – normal operating noise.
The drying time is too
long.
Fluff filter is soiled.
▶
→"Cleaning the fluff filter", Page31
The ambient temperature is greater than 30 °C.
▶ Ensure that the ambient temperature is lower than
30 °C.
The ambient temperature is lower than 15 °C.
▶ Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶ Ventilate the appliance's installation location.
The appliance's ventilation opening is blocked.
▶ Ensure that the ventilation opening of the appliance
is kept clear.
Heat exchanger is soiled.
▶
→"Running the basic appliance care programme
on the appliance", Page37
Automatic self-cleaning function rinses the appliance's
heat exchanger.
1. Not a fault.
2. Do not pull out the condensation tank.
3. Do not cancel the programme.
Water is leaking from
the appliance.
Appliance is not correctly aligned.
▶
→"Aligning the appliance", Page16
Water drain hose is not connected correctly.
Loading ...
Loading ...
Loading ...