Loading ...
Loading ...
Loading ...
en operation
30
– Tie cloth belts, apron strings,
etc. together or use a laundry
bag.
– Remove curtain hooks and lead
strips or use a mesh laundry
bag
– Use a mesh laundry bag for
small items of laundry, such as
children's socks
– Separate items of laundry and
shake them out, or observe the
programme description
– Spin the laundry before drying
operation
12 Basic operation
operation
12.1 Switching on the appli-
ance
Requirement:The appliance has
been correctly installed and connec-
ted.
→"Installation and connection",
Page12
▶ Turn the programme selector to a
programme.
Note:The lighting for the drum goes
out automatically.
12.2 Setting a programme
1. Turn the programme selector and
set the required programme.
→"Programmes", Page26
2. If required, adjust the programme
settings.
12.3 Loading laundry
Note:To prevent creasing, note the
maximum load for the programmes.
→"Programmes", Page26
Requirements
¡ The laundry is prepared and sor-
ted.
→"Laundry", Page29
¡ The drum is empty.
1. Open the door.
2. Place the laundry in the drum.
3. Close the door.
Ensure that there is no laundry
trapped in the door.
12.4 Starting the programme
Requirement:A programme is set.
→"Setting a programme", Page30
▶ Press Start/ Reload .
a The display shows the programme
duration or the "Ready in" time.
a After the programme has ended,
the display shows: "End" .
Note:If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
12.5 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Requirement:A programme has
started.
→"Starting the programme",
Page30
1. Press Start/ Reload .
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→"Display", Page20
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press Start/ Reload .
Loading ...
Loading ...
Loading ...