Loading ...
Loading ...
Loading ...
Appliance care en
37
15.2 Preparing the condensa-
tion container for the ap-
pliance care programme
Note:If the condensation is drained
using the drain hose, the condensa-
tion container must be prepared be-
fore the basic or intensive appliance
care programme.
→"Water drain hose", Page13
1. Remove the stopper from the re-
cess in the condensation con-
tainer.
2. Insert the plug from below.
a The condensation container is
ready for the appliance care pro-
gramme.
Note:If the condensation is drained
using the drain hose, perform the
above-mentioned steps after the ba-
sic or intensive appliance care pro-
gramme in the reverse order.
15.3 Starting the appliance
care programme
Requirements
¡ The appliance is ready to run the
appliance care programme.
→"Preparing the appliance for the
appliance care programme ",
Page36.
¡ The condensation container is
ready for the appliance care pro-
gramme.
→"Preparing the condensation
container for the appliance care
programme", Page37.
1. Set the programme to position1.
2. Press and hold Iron Dry .
3. Set the programme to position4.
4. Release Iron Dry .
a "CP1" and the programme dura-
tion alternate on the display.
15.4 Running the basic appli-
ance care programme on
the appliance
To remove any light soiling, you can
run a basic appliance care pro-
gramme.
Note:After a certain period of use,
the appliance automatically recom-
mends that you run the basic appli-
ance care programme. Before the
start and end of the programme, the
display shows the note "CrE" for 5
Loading ...
Loading ...
Loading ...