Loading ...
Loading ...
Loading ...
22
Burnt-in residues
To remove stubborn, burnt-in residues you
can order the grill cleaning gel (order
number 463582) from your specialist
retailer or from our after-sales service. You
can use it to clean the pan supports, the
burner parts and the stainless steel
cooktop base. If necessary apply the gel
and leave overnight. Please observe the
manufacturer’s instructions.
Do not use these cleaners
■ scouring or chemically aggressive
cleaners
■ cleaners containing acid (e.g. vinegar,
citric acid, etc)
■ cleaners containing chloride or with a
high content of alcohol
■ oven cleaner
■ hard and scratchy sponges, brushes or
scouring pads
■ carefully rinse new sponge clothes
before the first use
Part/surface Recommended cleaning method
Stainless steel
surfaces
Clean with a soft cloth and some
soapy water; polish dry with a soft
cloth. Do not use too much water to
avoid water entering the appliance.
Caution!
Damage to the seal: Do not clean
the gap around the stainless steel
surface with sharp objects. Only
clean with a soft brush.
To remove stubborn residues or
discolouration because of the heat,
you can order a stainless-steel
cleaner (order number 464524)
from your specialist retailer or our
after-sales service.
Pan support Carefully take off pan supports for
cleaning. Soak in soapy water.
Clean with a brush and some
detergent.
Be careful when cleaning around
the rubber rests to ensure they do
not come loose.
Rinse with clear water. Carefully dry
pan support before assembly.
Do not clean in a dishwasher!
Control knobs Clean with a soft, moist cloth and
some soapy water; do not use too
much water.
Caution!
Damage to the appliance: Do not
pull off the control knobs to clean
them.
Burner parts Rinse with clear water. Carefully dry
burner parts before assembly.
Do not clean in a dishwasher!
Ignition sparkers If required, clean with a fine brush.
Loading ...
Loading ...
Loading ...