Loading ...
Loading ...
Loading ...
Maintenance
To get the best performance of the unit, keep your discs, tapes, and mechanism clean.
Cleaning the unit
• Stains on the unit
Should be wiped off with a soft cloth. If the unit is heavily
stained, wipe it with a cloth soaked in water-diluted neutral
detergent and wrung well, then wipe clean with a dry cloth.
• Avoid the following since they may cause damage to the
unit.
- DO NOT wipe it with ahard cloth.
- DO NOT wipe it strong.
- DO NOT wipe it with thinneror benzine.
- DO NOT apply any volatile substance such as
insecticides to it.
- DO NOT allow any rubber or plastic to remain in
contact with it for along time.
Handlingcassette
Handling discs
_J
• Remove the disc from its case by
holding it at the edge while pressing the
center hole lightly.
• Do not touch the shiny surface of the
disc, or bend the disc.
• Put the disc back in its case after use to
prevent warping.
• Be careful not to scratch the surface of
the disc when placing it back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and moisture.
To clean the disc
Wipe the disc with a soft cloth in a straight
line from center to edge.
tapes
If the tape is loose in its cassette, take up
the slack by inserting a pencil in one of
the reels and rotating.
If the tape is loose, it may get stretched,
cut, or caught in the cassette.
Be careful not to touch the tape surface.
• Avoid the following places to store the
tape:
-- In dusty places
-- In direct sunlight or heat
-- In moist areas
-- Near a magnet
._ DO NOT use any solvent--such as
conventional record cleaner, spray, thinner, or
benzine--to clean the disc.
- 22-
Loading ...
Loading ...
Loading ...