Loading ...
Loading ...
Loading ...
BackCDs
Continued I_
This unit has been designed to playback the following CDs:
Audio CD, CD-R, and CD-RW.
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back when they are already
"finalized"
• You can play back your original CD-Rs or CD-RWs
recorded in music CD format ONLY. (If CD-RWs have
been recorded in different format, erase all the data on CD-
RWs completely before re-recording on the discs.)
I
DO NOT play back CD-Rs or CD-RWs
recorded the sound files such as MP3.
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or if the player's lens is dirty.
Important notices:
• In general, you will have the best performance by keeping
your CDs and the mechanism clean.
- Store CDs in their cases, and keep them in cabinets or on
shelves.
- Keep the unit's carrousel closed when not in use.
• Continuous use of irregular shaped discs (heart-shape,
octagonal, etc.) can damage the disc rotating mechanism.
x@
• CD-RWs may require a longer readout time since the
reflectance of CD-RWs is lower than for regular CDs.
Loading CDs
1Press &.
The unit automatically turns on and the
carrousel comes out.
2 Place one or two discs correctly on the front
recesses of the disc tray, with its label side up.
3If you wish to load a third disc, press o,_c_
DISC CHANGE on the unit or DISC
SKIP on the remote control.
The disc tray rotates by 120 °. o_sc
4Press & again.
The carrousel closes.
_About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
Disc number
Disc indicator _€
Disc marker
° The disc marker lights up for the disc number you have selected.
° The disc indicator rotates while the corresponding CD is being
played.
° The disc indicator goes off when the unit has detected that there is
no CD on the corresponding disc tray.
Playing Back CDs--AII Disc and One Disc
You can play all loaded CDs continuously--All Disc play, or
one selected disc--One Disc play.
All Discplay
1Load CDs.
• If the current playing source is not the CD player, press
CD I_/11, then • before going to the next step.
2 Press REPEAT repeatedly so that the ,_,_T
ALL DISC indicator lights up on the
display.
\"
Track number of the currently playing disc
(Track numbers exceeding 16 are not displayed.)
CORRECT INCORRECT
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
Track number Elapsed playing time
• Each time you press the button, the indication on the
display changes as follows:
ALL DISC ;_!!_C""-_'_!!_/_:'i_,'/"/*q
(initial setting)
* See page 15.
-12-
Loading ...
Loading ...
Loading ...