Loading ...
Loading ...
Loading ...
cause bodily injury. Always allow adequate ventilation around the power adapter while in use. To ensure maximum battery life, avoid charging
your product for more than a week at a time, as overcharging may shorten battery life. Over time, an unused product will discharge and must
be recharged before use. Disconnect the product from power sources when not in use. Use the product only for their intended purposes.
Medical Devices. Product may emit electromagnetic fields. Product contains magnetic components which may interfere with pacemakers,
defibrilators, or other medical devises. These electromagnetic fields may interfere with pacemakers or other medical devices. Consult with
your physician prior to use if you have any medical device including pacemakers. If you suspect the product is interfering with a medical
device, stop using the product immediately and consult your physician. Medical Conditions. If you have any medical condition that you
believe could be aected by product, including but not limited to; seizures, blackouts, eyestrain or headaches, consult your physician prior
to use of product. The use of a integrated high-powered flashlight contains a light sensitivity hazard. Use of the light in Strobe Mode may
cause seizures in persons with photosensitive epilepsy, which may result in serious injury or death. Light. Staring directly into the light beam
or shine of the flashlight may result in permanent eye injury. The product is equipped with a high output LED pre-focused lamp that emits a
powerful beam at the highest setting. Cleaning. Power o the product before attempting any maintenance or cleaning. Clean and dry
product immediately if it comes in contact with liquid or any type of contaminant. Use a soft, lint-free (microfiber) cloth. Avoid getting moisture
in openings. Explosive Atmospheres. Obey all signs and instructions. Do not operate product in any area with a potentially explosive
atmosphere, including fueling areas or areas which contain chemicals or particles such as grain, dust or metal powders. High-
Consequence Activities. This product is not intended for use where the failure of the product could lead to injury, death or severe
environmental damage. Radio Frequency Interference. Product is designed, tested, and manufactured to comply with regulations
governing radio frequency emissions. Such emissions from the product can negatively aect the operation of other electronic equipment,
causing them to malfunction. Model Number: GB250 This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Loading ...
Loading ...
Loading ...