Loading ...
Loading ...
Loading ...
a. Slide the Foam roll tube (17) into the hole on the Base frame (1). Push 2 x Ø17mm Foam rolls (69)
onto each side of the Foam roll tube (17).
b. Attach the Leg developer (15) to the Base frame (1) using M10 x 60mm Allen bolts (29) and 2
x
Ø10mm Washers (41), M10 Aircraft nut (42) and M10 Nut cap (64).
c. Slide the Foam roll tube (17) into the hole on the Leg developer (15). Push 2 x Ø17mm Foam roll
s
(69) onto each side of the Foam roll tube (17).
Note: (53/55) were fixed in the factory.
Step 10
Assembly instructions
18
Pre-fitted
Pre-fitted
Loading ...
Loading ...
Loading ...