Loading ...
Loading ...
Loading ...
When you do not know the frequency of the station, proceed
as follows.
IPOWER --_ ON I
Select SPEAKERS A 1
and/or B.
oo©
Press TUNER.
Select FM or AM.
Press TUNING + or -.
For a higher frequency, press TUNING +.
For a lower frequency, press TUNING -.
When a station is received, automatic tuning stops
automatically. To change the station, press + or - again.
When sweeping does not stop at the desired
station
The signal strength is weak. Tune in the station as described
in "Tuning in a Station Directly" on page 9.
Quickly tuning in a roughly known frequency
Proceed as the following example.
Example: The station arround AM 700 kHz.
AM DIRECT AM DIRECT
7 4
+
7 4
kHz
kHz
A total of 30 FM/AM stations can be memorized in any
desired sequence.
IPOWERI _ 3 4
--ON, T i i
Select SPEAKERS 1
A and/or B.
Press TUNER.
Tune in the desired station. (See "Automatic
Tuning" or "Tuning in a Station Directly".)
Press MEMORY.
The MEMORY indicator appears for a few seconds.
Press SHIFT to select the memory page (A, B
or C).
Each time the button is pressed, A, B or C is
selected cyclically.
5
Press the desired numeric button (1 to 0)
while the MEMORY indicator is displayed.
Repeat steps from 2 through 5 for presetting other
desired stations.
Use of memory pages
The memory pages (A, B and C) can be used to classify
stations according to the music category, station band, etc.
Replacing a preset station
Preset another station on the number of the station to be
replaced. The previously preset station will be erased.
IMPORTANT
The memorized station is maintained for approximately one
month even if the power cord is disconnected from the AC
power outlet. If they are erased, store the stations again.
10
Loading ...
Loading ...
Loading ...