Loading ...
Loading ...
Loading ...
installation & maintenance_17
CONNECTING THE WATER SUPPLY HOSE
• Connect the other end of the water supply hose to the
inlet water valve at the back of the washer. Screw the hose
clockwise all the way in.
• Connect the other end of the water supply hose to the
inlet water valve at the back side of the washer. Screw
the hose clockwise all the way in.
• If the water tap is a screw type, assemble a water supply
hose that fits to the tap as shown. After completing
connection, if water leaks from the hose, then repeat the
same steps.
After completing connection, if water leaks from the hose, then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big, remove the spacing ring before inserting the faucet
into the adaptor.
If you do not want to use the hot water supply hose, insert the water intake cap onto the
hot water supply intake. When you do a wash, press
Temp.
to select Cold.
03 INSTALLATION & MAINTENANCE
F700S_DC68-03271Q-01_EN.indd Sec6:17F700S_DC68-03271Q-01_EN.indd Sec6:17 7/27/2020 11:33:40 AM7/27/2020 11:33:40 AM
Loading ...
Loading ...
Loading ...