Loading ...
Loading ...
Loading ...
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Use (B) and (E) to change the Home City.
●
For details refer to the information
below.
l
City Table
4. Press (D).
5. Use (E) to select a summer time setting.
Each press of (E) cycles through available
settings in the sequence shown below.
●
[AUTO]
The watch switches between standard
time and summer time automatically.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
6. Press (A) to exit the setting screen.
Setting the Time and Date
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Keep pressing (D) until the setting item
you want to change is selected.
●
Each press of (D) moves to the next
setting item in the sequence shown
below.
Power Saving
Auto adjust
Illumination duration
Auto Light enable/disable
Operation tone enable/disable
Day of the week language
Date display format
12/24-hour timekeeping
Day
Month
Ye a r
Minutes
Hours
Seconds
Summer time
Home City
4. Configure the date and time settings.
●
To reset the seconds to 00: Press (E). 1
is added to the minutes when the
current count is between 30 and 59
seconds.
●
Use (B) and (E) to change the other
settings.
5. Repeat steps 3 and 4 to select time and
date settings.
6. Press (A) to exit the setting screen.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
●
This operation is not required if the watch is
not paired with a phone.
1. If the watch is in any mode besides the
Timekeeping Mode, hold down (D) for at
least two seconds to enter the
Timekeeping Mode.
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Press (D) 14 times.
This displays [RCV].
4. Press (E) to select the auto time
adjustment setting you want.
[OFF]: Auto time adjustment disabled.
[ON]: Auto time adjustment enabled.
5. Press (A) to exit the setting screen.
Operation Guide 5608
5
Loading ...
Loading ...
Loading ...