Loading ...
Loading ...
Loading ...
3. Hold down (A) for at least two seconds.
Release the button when the hours digits
start to flash.
Hours
4. Use (B) and (E) to change the hour setting.
●
If you are using 12-hour timekeeping,
[P] indicates p.m.
5. Press (D).
This causes the minutes digits to flash.
Minutes
6. Use (B) and (E) to change the minute
setting.
7. Press (D).
This causes the alarm type to flash.
8. Press (E) to display [SCHEDULE].
9. Press (A).
This displays a screen for setting the year,
month, and day.
●
Use (B) and (E) to change the currently
selected setting item.
●
Use (D) to move between setting items
(year, month, day).
Month
Ye a r
Day
10.
Press (A) to exit the setting screen.
●
[ALM] is shown on the display while an
alarm is set.
11. Hold down (D) for at least two seconds to
return to the Timekeeping Mode.
Note
●
A beeper sounds for 10 seconds when
an alarm time is reached.
●
You can also use G-SHOCK
Connected to configure alarm time
settings.
● To stop the alarm
Pressing any button while the beeper is
sounding stops it.
Configuring the Hourly Time
Signal Setting
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (E) to display [SIGNAL].
3. Press (A) to toggle the hourly time signal
between enabled (on) and disabled (off).
●
[SIG] is shown on the display while the
hourly time signal is on.
4. Hold down (D) for at least two seconds to
return to the Timekeeping Mode.
Note
●
You can also use G-SHOCK
Connected to configure the hourly time
signal setting.
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
●
To have an alarm or hourly time signal
sound again, turn it back on.
Note
●
Indicators are displayed while any of
the alarms or the hourly time signal is
turned on.
●
The applicable indicators are not
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Alarm Hourly time signal
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Use (E) to scroll through alarm numbers
([AL1] to [AL5]) and the hourly time signal
([SIGNAL]) screens until the one whose
setting you want to change is displayed.
Alarm or hourly time signal
3. Press (A) to turn off an alarm or the hourly
time signal.
●
Each press of (A) toggles between ON
and OFF.
●
Turning off all of the alarms and the
hourly time signal causes [ALM] and
[SIG] to disappear from the display.
Operation Guide 5608
14
Loading ...
Loading ...
Loading ...