GE - General Electric JS900SK2SS GE electric range

User Manual - Page 29

For JS900SK2SS.

PDF File Manual, 36 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ge.com
Ovenwill notself-clean
Possible Causes
The oven temperature is
too high to set a self-cleml
operation.
Oven controls improperly set.
What ToDo
_Mlow the oven to cool and reset the controls.
See the Using the self-cleaning oven section.
"Crackling" or This is the sound of the This is normal.
"popping" sound metal heating and cooling
during both the cooking and
cleaning functions.
Excessivesmoking Excessive soil. PYess the CLEAR/OFFpad.Open the windows to
duringa clean cycle rid the room of Slt/oke. Wait until the LOCKEOlight
goes off. Wipe up the excess soil and reset the
clean cycle.
Oven door will not Oven too hot. Allow the oven to cool below locking temperature.
open after a
clean cycle
Oven not clean after Oven controls not properly set. See the Using the self-cleaning oven section.
a clean cycle
Oven was heavily soiled. (3can up heavv, spillovers before ,startiw_,_ the (lean
cycle. Heavily soiled ovens may need to sell:clean
again or for a longer period of time.
"LOCKED"flashes The self-clema cycle has been (]lose the oven door.
in the display selected but the door is not
closed.
"LOCKED" Iight is on The oven door is locked Press the CLEAR/OFFpad. _Mh>w the .veil to cool.
when yon want to cook because the temperature
inside the oven has not
dropped below the
locking temperature.
"T-- and a number You have a traction Press the CLEAR/OFFpad. Put the oven back into
or letter"flash error code. operation.
in thedisplay If the function code repeats. Disconnect :ill power to the range for at least
30 seconds and then reconnect power. If the
flmction error code repeats, call for service.
29
Loading ...
Loading ...
Loading ...