GE - General Electric JS900SK2SS GE electric range

User Manual - Page 22

For JS900SK2SS.

PDF File Manual, 36 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Careand cleaningoftherange.
Painted Surfaces
Painted suHi_ces include the doo_; top of
the control panel and the drawer fl'ont.
Clean fl/ese with soap and water or a
vinegar and water solution.
Do not use COillil/ercial o_,en cleaneis,
cleaning powde_, steel wool or hm_h
abrasixes on an) painted sun'hce.
Control Panel
!'!:_Clean up splattex_ with a damp cloth.
!i_:You may also use a glass cleane_:
!i?:Remoxe heavier soil with wam_
soapy wateE
}i_:Do not use abrasixes of am kind.
Do not rub or clean the door gasket--
it has an extremely low resistance to
abrasion.
If you notice the gasket becoming worn,
frayed or damaged in any way or if it has
become displaced on the door, you should
have it replaced.
Cleaning the Oven Door
To clean the inside of the door:
;i_ Because tile area inside tile gasket is
cleaned dtwing tile self:clean cycle, you
do not need to clean this by hand.
_: Tile area outside tile gasket and
the door liner can be cleaned with a
soap-filled steel wool or plastic pad,
hot water and detergent. Rinse well
with a vinegar and water solution.
To clean the outside of the door:
iJi::Use soap and water to thoroughly
clean the top, sides and ti'ont of the
oven dooi: Rinse well. _O/l Ill,Iv [llso
use a glass cleaner to clean tile glass
on tile outside of tile do(n: Do not let
water drip into the vent openings.
iJi::If any stain on tile door vent trim is
persistent, use a soft abrasive cleaner
and a sponge-scrtfl)ber tor best results.
iJi::Spillage of marinades, fl'uitjuices,
tomato sauces and basting materials
containing acids may cause
discoloration and should be wiped
up immediately: When suHhce is cool,
clean and rinse.
ij?::Do not use ()veil cleaners, cleaning
powde_ or hm_h abrasives on the
outside of tile dora:
Hingelock
Pullhinge locks down to unlock.
[ (TU/
Removalposition
22
Lift-Off Oven Door
The door is very heavy. Be careful when
removing and lifting the door.
To remove the door:
[] Fully open tile door.
[] Pull tile hinge locks down toward
tile door fl'ame, to tile unlocked
position. A tool, such as a small
fiat-blade screwdriver; may be
reqtfired.
[] Firefly grasp both sides of tile door
at tile top. Donot/fit the doorby the
handle.
[] Close door to tile door remoxal
position, which is half Win between
tile broil stop position and flflly
closed.
[] lift door tip and ()lit until tile hinge
am_ is clear of the slot.
Toreplace the door:.
[] Firefly grasp both sides of tile door
at tile top. DOnot/lft the doorby the
handle.
] "x4ith tile Bottom Hinge
arm
door at tile edge
same angle as ofsl0t
X
the remo_fl
position, seat the
notch stop of
the hinge am_
into tile bottom
edge ()f the hinge slot. The notch in
the hinge am_ must be flfllv seated
into the b()ttom of the slot.
[] Full) open tile door tmfil it is
parallel to tile floo_: If tile door will
not fillly open, the notch stop is not
seated correctly in the bottom edge
of the slot. Repeat step 2 if
necessaiT:
[] Push the hinge locks up against the
fl'ont ti'ame of tile oxen caxit_ to tile
locked position.
arm
Hingelock
Push hinge locks up to lock.
F_] Close tile oxen doo_:
IJI
Loading ...
Loading ...
Loading ...