Loading ...
Loading ...
Loading ...
11
AIR CONDITIONER FEATURES
Thoroughly familiarize yourself with the control panel shown below and all of its functions. Afterwards, follow the symbol for the functions you
desire. This unit can be controlled by the unit control or the remote control.
NOTE: This manual does not include Remote Control Operations; see the Remote Control Instructions packed with the unit for details.
1. POWER button
Power switch ON/OFF.
2. DOWN (<) and UP (>) buttons
Used to adjust (increase/decrease) temperature
settings (1°F/1°C increments) in a range of 62°F
(17°C) to 86°F (30°C) or to set the TIMER setting in a
range of 0 – 24 hours.
NOTE: The control is capable of displaying the
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press and
hold the Up and Down buttons at the same time for
3 seconds.
3. MODE select button
Selects the appropriate operating mode. Each
time you press the button, a mode is selected in a
sequence that goes from AUTO, COOL, DRY and
FAN. The mode indicator light illuminates next to the
different mode settings.
4. FAN button
Control the fan speed. Press to select one of three
fan speeds: LOW, MID, HIGH or AUTO. The fan
speed indicator light illuminates next to the different
fan settings.
5. TIMER button
Used to initiate the AUTO ON start time and AUTO
OFF stop time program, in conjunction with the (<)
and (>) buttons. The timer ON/OFF indicator light
illuminates next to the timer ON/OFF settings.
6. SLEEP button/Filter Reset
Used to initiate the SLEEP operation.
NOTE: After 250 hours of operation, the lter indicator
light illuminates. This feature is a reminder to clean
the Air Filters for more ecient operation. Press and
hold the SLEEP button for 3 seconds to reset lter
reminder light.
7. LED display
Shows the set temperature in “°C” or “°F” and the
Auto-timer settings. While on DRY and FAN modes,
it shows the room temperature. (Details about error
codes that may appear on the display can be found
on page 13.)
8. FILTER indicator
NOTE: After 250 hours of operation, the lter indicator
light illuminates. This feature is a reminder to clean
the Air Filter for more ecient operation.
• Press and hold the FAN button for 3 seconds to
cancel the reminder.
• Press and hold the SLEEP button for 3 seconds to
reset lter reminder light.
9. Swing button
Used to initiate the Auto swing feature. When the
operation is ON, press the SWING button can stop
the louver at the desired angle.
FIG. 24
Loading ...
Loading ...
Loading ...