Loading ...
1.0 IMPORTANT SAFETY
INSTRUCTIONS
WARNING – TO REDUCE RISK OF INJURY:
1. Read and understand the entire owner’s
manual before attempting assembly or
operation.
2. Read and understand the warnings posted
on the machine and in this manual. Failure
to comply with all of these warnings may
cause serious injury.
3. Replace the warning labels if they become
obscured or removed.
4. This powered slip roll machine is designed
and intended for use by properly trained and
experienced personnel only. If you are not
familiar with the proper and safe operation of
a powered slip roll, do not use until proper
training and knowledge have been obtained.
5. Do not use this powered slip roll for other
than its intended use. If used for other
purposes, JET disclaims any real or implied
warranty and holds itself harmless from any
injury that may result from that use.
6. Always wear approved safety glasses/face
shields while using this powered slip roll
machine. Everyday eyeglasses only have
impact resistant lenses; they are not safety
glasses.
7. Before operating this powered slip roll
machine, remove tie, rings, watches and
other jewelry, and roll sleeves up past the
elbows. Remove all loose clothing and
confine long hair. Non-slip, steel-toed
footwear, and anti-skid floor strips are
recommended.
8. Wear ear protectors (plugs or muffs) during
extended periods of operation.
9. Do not operate this machine while tired or
under the influence of drugs, alcohol or any
medication.
10. Make certain the switch is in the OFF
position before connecting the machine to
the power supply.
11. Make certain the machine is properly
grounded.
12. The slip roller must be anchored to the floor.
13. Make all machine adjustments or
maintenance with the machine unplugged
from the power source.
14. Remove adjusting keys and wrenches. Form
a habit of checking to see that keys and
adjusting wrenches are removed from the
machine before turning it on.
15. Keep safety guards in place at all times
when the machine is in use. If removed for
maintenance purposes, use extreme caution
and replace the guards immediately.
16. Check damaged parts. Before further use of
the machine, a guard or other part that is
damaged should be carefully checked to
determine that it will operate properly and
perform its intended function. Check for
alignment of moving parts, binding of
moving parts, breakage of parts, mounting
and any other conditions that may affect its
operation. A guard or other part that is
damaged should be properly repaired or
replaced.
17. Provide for adequate space surrounding
work area and non-glare, overhead lighting.
18. Keep the floor around the machine clean
and free of scrap material, oil and grease.
19. Don't use in dangerous environment. Don't
use power tools in damp or wet locations, or
expose them to rain. Keep work area well
lighted.
20. Keep visitors a safe distance from the work
area. Keep children away.
21. Make your workshop child proof with
padlocks, master switches or by removing
starter keys.
22. Give your work undivided attention. Looking
around, carrying on a conversation and
“horse-play” are careless acts that can result
in serious injury.
23. Do not overreach. Failure to maintain proper
working position can cause you to fall into
the machine or allow clothing to get caught,
pulling you into the machine.
24. Use the right tool at the correct speed and
feed rate. Do not force a tool or attachment
to do a job for which it was not designed.
The right tool will do the job better and more
safely.
25. Use recommended accessories; improper
accessories may be hazardous.
26. Maintain tools with care. Keep the machine
clean for the best and safest performance.
Follow instructions for lubricating the slip
roller.
27. Deburr any sharp metal edges of the
workpiece before placing it into the slip
roller. Use leather gloves when handling
workpieces.
Loading ...
Loading ...
Loading ...