Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
Before plugging in and using your new Goldair
panel heater, check all surfaces to ensure the heater
is not damaged in any way.
Check that the On/Off switch is set to the Off position
before plugging the heater into the mains supply.
Pull the temperature sensor above the power switch
out as far as it will go (approx. 25mm).
Use the On/Off switch on the side of the heater to turn your heater on. The OFF/ON
indicator on the lower left corner of the LCD screen will show the heater is in standby
mode. The screen will also display the default temperature of 25℃. The ECO indicator
will also be displayed showing that the heater is in the default setting for best economy.
The current ambient room temperature (RT) will also be displayed.
Temperature
Sensor
ON/OFF Switch
OFF/ON indicator
And Timer indicator
Set temperature
Best economy setting
WiFi module operational
Temperature setting
Ambient room temperature
ON/OFF
Button
SET
Button
Adjustment
Buttons
Child Lock
Button
Operating Your Heater
Your Goldair Panel Heater will provide background warmth. This Panel Heater is
designed to take the chill off the room.
The surface of this Panel Heater can be painted with good quality paint (acrylic
or enamel).
Decorating tip: All wall mounted heaters may cause paint to discolour or wall paper to
lift.
Loading ...
Loading ...
Loading ...