Loading ...
Loading ...
Loading ...
Components
Heater x 1
Screw pack components
Drill bits x 2
(1 x 7mm for plasterboard or wooden walls,
1 x 8mm for masonry walls)
Mounting Plugs x 4
Screws x 4
Screw Caps x 4
Wall Mounting & Position Instructions
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined below. The heater needs to be mounted so that the power switch is in the top
right hand corner. Do not run the power cord behind the heater. This will determine where
you mount the heater in relation to where the power socket is located.
NOTE: Your Goldair EcoPanel Heater should
be installed with at least 300mm clearance
from the floor and any other surrounding
parts including other appliances, side walls,
ceilings, shelves and soft furnishings.
DO NOT RUN THE POWER CORD
BEHIND THE HEATER.
WALL MOUNTED HEATERS ARE
ONLY TO BE MOUNTED ON WALLS
THAT COMPLY WITH CURRENT
AS/NZS SPECIFICATIONS &
BUILDING REGULATIONS
300mm
300mm
300mm
300mm
Loading ...
Loading ...
Loading ...