Loading ...
Loading ...
Loading ...
E-7
PREPARATION
1
2
3
4
Remove the Back Panel.
Remove the plastic bag
from the each lter.
Install the lters in the correct order as
shown.
Install the Back Panel.
OPERATION
START STOP
The fan speed is automatically controlled depending on the
5 detection. (PM2.5 / Usual dust / Temperature /Humidity /
Light)
Operates at HIGH fan speed for 60 minutes and then
alternates between Low and High level for 20 minutes each.
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
• The Plasmacluster Ion can not be turned “OFF”. (Ref.E-9)
NOTE
2
1
3
3
Back Panel
HEPA Filter
Deodorizing Filter
The fan speed is automatically controlled depending on the 7
detection. (Ref.E-1)
Click
Deodorizing Filter
HEPA Filter
Tag
• Front Display, Cleanliness Monitor and Air Outlet LED
automatically switch ON and OFF based on room
brightness. (When light control is set to "Auto". Ref.E-10)
NOTE
NOTE
• When replacing the lter, making a memo of the start of
use date is recommended.
START/STOP
HAZE MODE
AUTO MODE
(KC-G40)
INTELLIGENT MODE
(KC-G60 / KC-G50)
FILTER INSTALLATION
Always be sure to remove the
power plug from the wall outlet.
Loading ...
Loading ...
Loading ...