Loading ...
Loading ...
ENGLISH
E-2
The air purier draws in room air through the
air intake, circulates it through a Pre-Filter, a
Deodorizing Filter and a HEPA Filter inside
the unit, and then discharges it through the air
outlet. The HEPA Filter can remove 99.97%
of dust particles as small as 0.3 microns that
pass through the lter and also helps absorb
odors.The Deodorizing Filter gradually absorbs
odors as they pass through the lter.
Some odors absorbed by the lters will break
down over time, causing additional odors.
Depending on usage conditions, and especially
if the unit is used in environments signicantly
more severe than a normal household, these
odors may become noticeable sooner than
expected. If these odors persist, replace the
lters. (Ref. E-13)
When minerals in tap water adhere to the
lters and become a hard and white, they
absorb odors in the room that can cause the
emission of an unpleasant odor when the
humidifying lter is dry. (Varies depending on
water quality and other environmental factors)
If this occurs, perform humidifying lter
maintenance. (Ref.E-12)
•
The air purier is designed to remove air-suspended dust
and the odors.
The air purier is not designed to remove harmful gases
such as carbon monoxide contained in cigarette smoke.
The air purier may not completely remove an odor if the
source of the odor is still present.
Please read before operating
your new Air Purier
Pre-Filter
Deodorizing Filter
HEPA Filter
ENGLISH
Thank you for purchasing this SHARP Air Purier.
Please read this manual carefully before using
the air purier.
After reading, keep the manual in a convenient
location for future reference.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
...
E-3
• WARNING
• NOTE
• CAUTIONS CONCERNING OPERATION
• INSTALLATION GUIDELINES
• FILTER GUIDELINES
PART NAMES
.............................................
E-5
• FRONT
• BACK
• OPERATION PANEL
• FRONT DISPLAY
PREPARATION
..........................................
E-7
• FILTER INSTALLATION
OPERATION
...............................................
E-7
• START / STOP
• HAZE MODE
• INTELLIGENT MODE
(KC-G60 / KC-G50)
• AUTO MODE
(KC-G40)
• PLASMACLUSTER ION SPOT MODE
• SELECTING MODE
• CHILD LOCK
• HUMIDIFICATION SETTING
(REFILLING THE WATER TANK)
• ON TIMER
• OFF TIMER
• SELECTING DISPLAY
• PLASMACLUSTER ION ON / OFF
• HOW TO CHANGE VARIOUS SETTINGS
CARE AND MAINTENANCE
.................
E-11
• FILTER INDICATOR
• CARE INDEX
• WATER TANK
• UNIT / BACK PANEL
• HUMIDIFYING FILTER AND TRAY
• HEPA FILTER / DEODORIZING FILTER
• FILTER REPLACEMENT
TROUBLESHOOTING
............................
E-14
SPECIFICATIONS
....................................
E-15
NOTE
Loading ...
Loading ...
Loading ...