Loading ...
Loading ...
Loading ...
Not for
Reproduction
17
ENGLISH
Troubleshooting
Problem Cause Correction
Pump has following problems: failure
to produce pressure, erratic pressure,
chattering, loss of pressure, low water
volume.
1. Low pressure spray tip installed.
2. Inadequate water supply.
3. Clogged inlet hose screen.
4. Spray tip is obstructed.
5. Connections leak.
6. High pressure hose or spray gun
leaks.
1. Replace with high pressure
spray tip.
2. Provide adequate water flow.
3. Check and clean inlet hose
screen.
4. Clean spray tip.
5. Tighten connections or replace
o-ring.
6. Replace.
Detergent fails to mix with spray.
1. High pressure spray tip
installed.
2. Check ball stuck in detergent
siphoning system.
3. Detergent tube is clogged or
cracked.
1. Replace with low pressure spray
tip.
2. Free check ball. See Detergent
Siphoning Check Ball.
3. Clean or replace detergent tube.
Engine lacks power; will not start;
starts and runs rough or shuts down
during operation.
1. Engine switch set to
OFF (0) position.
2. Out of fuel.
3. Dirty air cleaner.
4. Spark plug wire not connected
to spark plug.
1. Set engine switch to
ON (I) position.
2. Fill fuel tank.
3. Clean or replace air cleaner.
4. Connect wire to spark plug.
For assistance with your product, visit our website www.Craftsman.com.
Loading ...
Loading ...
Loading ...