Craftsman CMXGWAS020737 2.3-GPM Cold Water Gas Pressure Washer (Battery and Charger Not Included)

OPERATOR’S MANUAL - Page 13

For CMXGWAS020737.

PDF File Manual, 40 pages, Read Online | Download pdf file

CMXGWAS020737 photo
Loading ...
Loading ...
Loading ...
Not for
Reproduction
12
ENGLISH
Maintenance
General Recommendations
Regular maintenance will improve the performance
and extend the life of the pressure washer. See any
qualified dealer for service.
The pressure washer’s warranty does not cover
items that have been subjected to operator abuse or
negligence. To receive full value from the warranty,
the operator must maintain the pressure washer as
instructed in this manual, including proper storage as
detailed in Winter Storage and Long Term Storage.
NOTICE Should you have questions about replacing
components on your pressure washer, please call (888)
331-4569 for assistance.
Some adjustments will need to be made
periodically to properly maintain your pressure
washer. Check the spray gun and nozzle extension
assembly for wear.
All maintenance in this manual and the engine
operator’s manual should be made at least once
each season.
Once a year you should clean or replace the spark
plug, clean or replace the air filter. A new spark
plug and clean air filter assure proper fuel-air
mixture and help your engine run better and last
longer. Please refer to your engine operator’s
manual for more details.
Before Each Use
1. Check engine oil level.
2. Clean debris.
3. Check water inlet screen for damage.
4. Check high pressure hose for leaks.
5. Check detergent siphoning tube for damage.
6. Check spray gun and nozzle extension for leaks.
7. Rinse out garden hose to flush out debris.
Pump Oil
DO NOT attempt any oil maintenance on this pump.
The pump is pre-lubricated and sealed from the
factory, requiring no additional maintenance for the life
of the pump.
Common Service Parts
PumpSaver ...........................6039
O-Ring Maintenance Kit ................705001
Water Inlet Screen .................. B2384GS
Engine Oil Bottle ............100005 or 100028
Fuel Stabilizer ..............100120 or 100117
Pressure Washer Maintenance
Clean Debris
Daily or before use, clean accumulated debris from
pressure washer. Keep linkage, spring and controls
clean. Keep area around and behind muffler free from
any combustible debris. Inspect cooling air slots and
openings on the pressure washer. These openings must
be kept clean and unobstructed.
pressure washer parts should be kept clean to reduce the
risk of overheating and ignition of accumulated debris.
Use a damp cloth to wipe exterior surfaces clean.
NOTICE Improper treatment of pressure washer could
damage it and shorten its life.
DO NOT insert any objects through cooling slots.
Use a soft bristle brush to loosen caked on dirt,
oil, etc.
Use a vacuum cleaner to pick up loose dirt and
debris.
Check and Clean Inlet Screen
Examine the screen on the pump’s water inlet. Clean it if
the screen is clogged or replace it if screen is damaged.
Check High Pressure Hose
The high pressure hose can develop leaks from wear,
kinking, or abuse. Inspect the hose each time before
using it. Check for cuts, leaks, abrasions or bulging
of cover, damage or movement of couplings. If any of
these conditions exist, replace the hose immediately.
Check Detergent Siphoning Tube
Examine the detergent tube and clean if clogged. The
tube should fit tightly on the barbed fitting. Examine
the tube for leaks or tears. Replace tube if damaged.
Detergent Siphoning Check Ball
Occasionally check ball in detergent siphoning
system may become stuck from storage, dried soap,
or minerals in water. The check ball can be freed by
performing the following:
NOTICE Before performing this procedure, be sure you
are wearing safety goggles as described below.
WARNING The high pressure stream of water
that this equipment produces could cut
through skin and its underlying tissues,
resulting in serious injury and possible
amputation.
NEVER repair high pressure hose. Replace it.
Replacement hose rating MUST equal or exceed
maximum pressure rating of unit.
WARNING Risk of eye injury.
Spray could splash back or propel objects
resulting in serious injury.
Always wear indirect vented (chemical splash) safety
goggles marked to comply with ANSI Z87.1 when using
or in vicinity of this equipment.
NEVER substitute safety glasses or dry-condition goggles
for indirect vented safety goggles.
Loading ...
Loading ...
Loading ...