Loading ...
Loading ...
Loading ...
-12-
1.To install an accessory using the Easy-
Lock feature, first loosen the clamping
knob by twisting it in a counter-clockwise
direction (Fig. 3).
2.Press the clamping knob so that the
clamping flange extends enough to fit a
blade in between the clamping flange and
the interface. You may need to loosen the
clamping knob more to allow adequate
room for the accessory. (Fig. 4)
3.Place the accessory onto the interface,
making sure the accessory engages all
pins on the interface and the accessory is
flush against the accessory holder (Fig.
5).
4.Release pressure on the clamping knob.
The spring action of the mechanism will
hold the blade in place while you secure it
(Fig. 6).
5.Tighten the clamping knob by twisting in a
clockwise direction (Fig. 3). Make sure to
tighten fully, until you can’t twist the
clamping knob (without it being
uncomfortable).
Note: Some accessories, such as scrapers
or blades, may be mounted either straight
on the tool, or at an angle to enhance
usability (Fig. 7).
In order to do this with the Easy-Lock
interface, place the accessory onto the
accessory holder making sure the accessory
engages all pins in the holder and the
accessory is flush against the accessory
holder. Securely lock the accessory in place
as described previously (Fig. 3).
Removing Accessories with
Easy-Lock Accessory Change
1.To remove an accessory, first loosen the
clamping knob by twisting it in a counter-
clockwise direction (Fig. 3).
2.Press the clamping knob and lift the
accessory bracket to take it off the pins.
You may need to loosen the clamping
knob more to allow adequate room to
remove the accessory. (Fig. 4)
Note: Blade may be hot after use, wait for
blade to cool down before touch.
Pins
Flange
Accessory
FIG. 6
FIG. 5
Assembly
FIG. 7
1605A000KS MM20V 05-21.qxp_MM20V 5/18/21 7:01 AM Page 12
Loading ...
Loading ...
Loading ...