Loading ...
Loading ...
Loading ...
6 INSTALLATION OF THE APPLIANCE
Cabinet requirement
Models are designed to be built into cabinetry either
below a benchtop or into a vertical cabinet.
WARNING
WARNING
• The cooker must be installed and serviced only
by an authorised person.
• A Certificate of Compliance MUST be supplied to
be kept by the customer.
• The packing materials must be removed before
you install the cooker.
• The surrounding kitchen cabinets must be able
to withstand 85°C. Electrolux WILL NOT accept
responsibility for damage caused by installation into
kitchen cabinets which cannot withstand 85°C.
• The vents, openings and air spaces MUST NOT
be blocked.
• You MUST NOT lift or pull the cooker by the
door handle.
• The cooker MUST be checked every five years.
• If the supply cord is damaged,it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• The appliance must not be installed behind a
decorative door in order to avoid overheating.
• Due to the weight (70kg) and size of the cooker,
2 persons are required to install it.
INSTALLATION OF THE APPLIANCE
TIPS & INFORMATION
IMPORTANT
To minimise the weight of the oven for easier
installation, remove the oven door and oven
internal accessory pack.
Press the l
removing the door.
Locking tab up at normal
position.
Press the locking tab down
for removing the door.
Gently close the door until
it comes to a stop. Then lift
the door o the hinge.
Leveling oven
Place a level in the oven as below making sure
the level sits on the front and rear forms.
Loading ...
Loading ...
Loading ...