Fisher-Price GJD44 Fisher Price Baby Sound Machine Twinkle & Cuddle Cloud Soother Crib-Attach Plush

Product's Documents

Below are documents related to this product, you can read online or download:
GJD44 photo

User Manual

This is the main product document for model GJD44.

The file format is pdf, 6 pages, you can download this manual here .

background
1
Keep this instruction sheet for future reference,
as it contains important information.
Adult set up and battery replacement are required.
Tool required for battery replacement: Phillips screwdriver (not included).
Requires four AA batteries (included).
Batteries included are for demonstration purposes only.
For longer life, use alkaline batteries.
Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to
a crib or playpen according to the instructions. Check frequently.
GJD44
background
2
1,5V x 4
AA (LR6)
REPLACE BATTERIES
Open the fasteners and pull to
remove the electronic unit.
Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
Remove the exhausted batteries
and properly dispose.
Insert four, new AA (LR6)
alkaline batteries.
Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
When sound or light from this toy
become faint or stop, it’s time for
an adult to change the batteries.
You may need to reset the
electronics if this toy begins to
operate erratically. Remove the
batteries and reinstall them.
Make your music/sounds/light and
volume level selections. See next
page for more information.
With the speaker/button facing
the front of the soother, fit the
electronic unit inside and close
the fasteners.
background
3
Place the strings at the top of the
soother on either side of the crib
top rail.
Tie the strings around the top rail
and a crib spindle in a knot.
Do not tie the strings in a bow as
they can be easily untied.
CRIB ATTACHMENT
WARNING
Prevent Entanglement Injury
This product may not attach to all crib
designs. Do not add additional strings
or straps to attach to a crib
or playpen.
background
4
Open the fasteners on the back
of the soother to make volume,
mode, sounds and light selections
on the electronic unit.
Volume
Mute (baby enjoys only
a light show)
ON with low volume
ON with high volume
Ready, Settle, Sleep™ Playlist
When you select this mode, music,
lights, and sounds gradually fade,
dim, and then turn off after
20 minutes. Music plays with lights
for 5 minutes followed by sounds
and lights for the next 5 minutes.
The next 10 minutes is sounds only.
READY, SETTLE, SLEEP™
Press soothers nose to activate
your selections!
Press and hold for a few seconds to
turn off.
Soothing Sounds
Press this button to cycle through
five different sound choices:
Gentle Wind, Night Forest,
Hearbeat, Waves or Rain. Sounds
play along with a light show for
10 minutes and then lights turn off.
The next 10 minutes is sounds only.
Lights
Choose a color for lights or select
no lights. Press this button to cycle
through eight different choices:
red, orange, yellow, green, blue.
purple, no lights or a preset
light show.
background
5
CARE
Protect the environment by not disposing of this product or any
batteries with household waste. This symbol indicates that this product
shall not be treated as household waste. Check your local authority for
recycling advice and facilities.
The soother is machine washable
without the electronic unit. Do not
immerse the electronic unit.
Open the fasteners on the back
of the toy and remove the
electronic unit.
Machine wash in cold water on the
gentle cycle. Do not use bleach.
Tumble dry on low heat.
When replacing the electronic
unit, be sure the speaker/button
faces the front of the soother.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid battery leakage:
Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable.
Insert batteries as indicated inside the battery compartment (+ and -).
Remove batteries during long periods of non-use. Always remove exhausted
batteries from the product. Dispose of batteries safely. Do not dispose of this
product in a fire. The batteries inside may explode or leak.
Never short-circuit the battery terminals.
Use only batteries of the same or equivalent type, as recommended.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the product before charging.
If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
background
6
©2019 Mattel. GJD44-0970
PRINTED IN CHINA 1102156599-DOM
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Consult the dealer or an experienced
radio/TV technician for help.
NOTE: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
users authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage
et (2) il doit pouvoir tolérer tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre son fonctionnement.
UNITED STATES: 1-800-432-5437.
Fisher-Price, Inc., 636 Girard Avenue,
East Aurora, NY 14052.
GREAT BRITAIN: Mattel UK Ltd, Vanwall
Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500303;
www.service.mattel.com/uk.
Mattel Europa B.V., Gondel 1, 1186 MJ
Amstelveen, Nederland.
CANADA: 1-800-432-5437.
Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
AUSTRALIA: Mattel Australia Pty. Ltd.,
658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering
Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd., Room 503-09,
North Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China.
Tel.: (852) 3185-6500.
MALAYSIA: Diimport & Diedarkan Oleh:
Mattel Southeast Asia Pte. Ltd., No 19-1,
Tower 3 Avenue 7, Bangsar South City,
No 8, Jalan Kerinchi, 59200 Kuala Lumpur,
Malaysia. Tel: 03-33419052.
SOUTH AFRICA: Mattel South Africa
(PTY) LTD, O ce 102 I3, 30 Melrose
Boulevard, Johannesburg 2196.

Specifications

Fisher-Price GJD44 Questions and Answers

See other models: GLD09 HBD29 GVF89 HBD28 DJD10